ECCPP Left Side Power Heated Memory Rear View Mirror with Turn Signal & Folding - Replacement for 2007-2013 Chevy Silverado & GMC Sierra 1500/2500 HD/3500 HD - Perfect for Winter Driving & Enhanced Safety

Product Description

Fit for 2007-2013 Chevrolet Silverado 1500 2007-2013 Chevrolet Silverado 2500 HD 2007-2013 Chevrolet Silverado 3500 HD 2007-2013 GMC Sierra 1500 2007-2013 GMC Sierra 2500 HD 2007-2013 GMC Sierra 3500 HD 2007-2013 GMC Yukon 2007-2013 GMC Yukon XL 1500 2007-2013 GMC Yukon XL 2500 2007-2013 Chevrolet Tahoe 2007-2013 Chevrolet Avalanche 2007-2013 Chevrolet Suburban 1500 2007-2013 Chevrolet Suburban 2500 Package Including 1 PCS driver Side mirror POWER ADJUSTED This is a power mirror, you can adjust the angle of the mirror through the car power switch to maximize the field of view. This power mirror can greatly improve the driver's convenience, allowing the driver to adjust the exterior mirror without further operation due to long distances. MEMORY FUNCTION The driver can adjust the optimal viewing angle of the rearview mirror according to his or her own height and driving habits. When the seat and steering wheel are adjusted for optimal comfort, then the memory can be stored. After someone else drives his or her own vehicle or is adjusted by others, the owner can easily open his memory and all related facilities will return to the optimal setting. HEATED The heating function is more suitable for rain and snow days. When the mirror is heated, the heater behind the lens quickly heats the mirror surface, slowly removing rain or fog from the mirror surface. Drivers do not have to manually wipe the mirror glass manually, which also reduces the risk of driving. TURN SIGNAL The turn signal is an important indicator that turns on when the vehicle turns to alert the front and rear vehicles and pedestrians. When you want to turn or change lanes, the turn signal will flash, Let other vehicles notice that you want to turn, avoid in time, and reduce the risk of collision. Replacement Side View Mirrors Step 1 - Access Roll down the window of the car. For electric mirrors, disconnect the negative battery terminal after this.Remove the screws of the door panel then take off the trim with a pry tool and and finally take off the door panel. If you have electric windows, unplug the harness. Use the nut driver to remove the nuts holding the side mirror in place and then remove it. Step 2 - Installation If it’s an electric mirror, replace the harness, checking that everything is properly hooked up. To complete the installation, screw the interior door panel back in place on the door and replace the trim. Put the negative battery cable back on the terminal and tighten properly.Put side view mirror in place so that the bolts on the mirror are through the holes in the assembly. Tighten the nuts with the nut driver until the mirror is held firmly. Test to see if the mirror wiggles.